http://ir-electric-heat.com/en/tags/10/ Recent content in 10 on Electric Infrared Heat Hugo en-us Thu, 04 Jun 2026 05:32:09 +0800 http://ir-electric-heat.com/en/posts/ir-lamp-for-sidel-sbo-10/ Thu, 04 Jun 2026 05:32:09 +0800 http://ir-electric-heat.com/en/posts/ir-lamp-for-sidel-sbo-10/ <p><img src="http://ir-electric-heat.com/images/978de03e89c77103547e0820ad423d55.png" alt="IR lamp for Sidel SBO 10"></p> <p>On the floor, when your Sidel SBO 10 is running stretch blow molding, the preform heating profile is the thin line between yield and scrap. If the heating tunnel drifts, you’re back to inconsistent wall thickness, flash, or weak necks. And every time you have to shut down to swap lamps, that’s downtime that hits your cost per thousand. We built an IR lamp for the SBO 10 to match the machine’s geometry and thermal behavior. The point is simple: keep the line moving with stable, repeatable heat. <strong>What matters, technically</strong> This lamp runs a short-wave quartz halogen emitter, tuned to the PET absorption band for rapid, through-thickness heating. Specs are aligned to the SBO 10: 2400 W, 230 V, R7s base, and a compact arc length that drops straight into the original reflector and holder. The quartz envelope runs hot and fast, hitting setpoint in seconds. That shortens warm-up and keeps the heating tunnel profile stable across shifts. We size the filament and reflector coating so output holds within <a href="https://o-yate.net">tight</a> tolerance, so you’re not chasing setpoints when you change colors or bottle weights. <strong>Why it works on the SBO 10</strong> On this machine, consistent preform temperature is what buys you repeatable stretch ratios and fewer pinholes. The lamp restores the OEM heating curve, giving you back the margin you need for high-speed cycles and thin-wall jobs. You’ll see fewer temperature swings in the tunnel, more consistent bottle weight, and less scrap from off-spec heating. Energy use drops because the emitter comes up fast and holds steady, avoiding the surge-and-recover that wastes power. <strong>Here’s what to keep in mind</strong> Installation is straightforward—R7s connector, correct wattage, and the right arc length—but this lamp runs hot. Keep reflectors clean and aligned, and verify the cooling airflow matches the SBO 10 design. For best life and stable output, run the lamp within its rated voltage band; overvolting shortens filament life and shifts the spectrum. Pair it with a <a href="https://o-yate.com">calibrated</a> pyrometer to lock in the setpoint, and you’ll get long lamp life with <a href="https://henruite.com">predictable</a> replacement intervals.</p>